How to do the daily maintenance of the floor scrubber?

Floor scrubber machines have been widely used in hotels, shops, hospitals, shopping malls, factories, schools and other places, and become one of the commonly used cleaning equipment.Routine maintenance of the floor scrubber can prolong the service life of the machine, save the cost of use and improve the efficiency.

So how do we carry out the daily maintenance of the floor scrubber?

General Guidelines for Routine Cleaning Equipment Maintenance

1. Empty and clean the waste water tank

During the operation of the scrubber, the water mixture containing sludge is absorbed, they can easily accumulate in the tank and emit a bad smell.

2. Empty fresh water tank

If the scrubber is not cleaned daily, stagnant water can become a source of bacteria.Therefore, it is very necessary to empty the water tank.

3. Remove the needle plate/cushion for inspection

Remove the pacifier pad to check and clean it. If there is one third of the pacifier pad left, please replace the pacifier pad in time to prevent the wear of the needle plate and reduce maintenance costs.

4. Clean the steak strips

After cleaning the suction and discharge rubber strip, the suction and discharge sheet assembly will be placed in a raised position to prevent damage to the rubber strip.

5. Wipe the case

Use an all-purpose cleaner and a damp cloth to wipe down the case of the machine to keep it looking clean.(Note: When cleaning the machine, please do not flush the machine with high-pressure spray or water hose, which may cause electrical system failure.)

Monthly maintenance and maintenance.

1. Clean the water filter

The clean water filter will be blocked by impurities in the water, which will affect the flow of water during the process of cleaning the floor.Clean the float located in the recovery tank

2. Check and clean the seal of the sewage tank cover

Check and clean the seal of the sewage tank cover to maintain a good sealing performance and achieve a good water absorption effect.

3. Check the battery

Clean the top of the battery to prevent electrode corrosion and check whether the battery wiring is loose; maintain good power storage performance and prolong the service life of the battery.