The reason for the large noise of the Walk behind Floor scrubber

When you use the Walk behind Floor scrubber after a period.you may find the noise becomes too big,if use in factory production workshop is no problem, because the environment noise also is bigger, but for the office area, the station waiting room, quiet area such as airport terminal if the noise when noise large may cause bad effect, So what are the problems caused by the noise of the Walk behind Floor scrubber becoming louder?

First of all, we should calm down and listen carefully to where the noise is coming from, such as the noise from the wheel part or the noise from the brush part or the noise from the water absorption part. Only by determining which part of the noise is coming from can we solve this problem appropriately.

After finding specific noises, the next thing to do is to determine the specific components of the noise for the wheel parts, it could be a wheel or wheels connected parts damage, leading to walking wheel unbalance and large noise, walking motor inside the crankcase of bearing or gear fault lead to produce noise, There could also be a brake problem causing the noise.

If it is the wheel failure we might need to change the new wheels, if the damage is connection we might need to change the pin or the bearing, if is a problem of crankcase have to find a professional maintenance personnel for maintenance, if is the brake problem, we should adjust the brake line of or is in the related parts and lubricants for decommissioning; When we find that the noise is from the brush part, there may be the following reasons, one is the brush or clean pad after grinding brush or clean pad needle seat and ground friction noise, the other is the brush from the card slot after falling out of the click.